Upper and lower cover assembly machine

If you press the "pause button" during the working process of the upper and lower cover assembly machine, the system will not work intermittently immediately. Each station will work intermittently in turn until there is no workpiece on the turntable. During this process, the running indicator will light up, indicating that the system The liquor upper and lower lid assembly machine is being stopped, and the indicator light will be off when the system is officially interrupted. During the working process of the upper and lower lid assembly machine, if the emergency stop button is pressed, the system will stop working immediately, and all the manipulators will stop working at that time. When the "emergency interrupt" button When pulled up, the system will initially reset the upper and lower cover assembly machine, and all the manipulators will return to the original position of the fully active upper and lower cover assembly machine, waiting for restart.

The function of the single-cover binding machine is to complete cover feeding, punching, and cover loading. In order to complete the function of 120 covers\/min, the mechanical layout of the equipment selects vibrating hopper for cover, double-channel cover feeding, double-knife blanking, and 2 stepper motors. Control cover feeding, a stepper motor controls paper feeding. Description of solenoid valve plunger plugging paper, etc. The mechanical system of the upper and lower cover assembly machine consists of the arrangement of the cover device, the transmission device of the upper and lower cover assembly machine, and the transmission device of the gasket material. , the blanking device and the paper plug device are composed.

The characteristics of the active upper and lower cap assembly machine and the introduction of the equipment assembly process: Put the upper and lower caps to be assembled into the left and right active hoppers: respectively, through the vibration and rotation in the hopper to make them enter the same-direction conveying chute, and then Entering the central press station through the slideway, through the rotation of the press, through the radial push of the negative plate, the upper and lower covers to be assembled are accurately positioned and adjusted in direction, and then continue to rotate through the platen. Then, the upper and lower columns are in Under the action of the cam track, the upper and lower covers are pressed together, and then the pressed upper and lower covers are separated from the pressure plate by the shifting fork, thus ending the entire assembly process.

The function of the single cover assembly machine is to complete the feeding of the cover, cut the paper and stuff it into the cover assembly. In order to complete the function of 120 sets\/min, the mechanical layout of the equipment chooses the vibrating hopper cover arrangement, double-channel cover feeding, Double-knife blanking, 2 stepper motors control cover feeding, one stepper motor controls paper feeding, solenoid valve controls cylinder to move piston plug paper, etc.

The mechanical system of the upper and lower cover assembly machine is composed of the arrangement of the cover device, the arrangement of the transmission device of the upper and lower cover assembly machine, the arrangement of the gasket material transmission device, the arrangement of the blanking device, the arrangement of the paper plug, etc. Principles: 1. Clean the cover, 2. Transfer the lid to the unloading position. 3. Feed the foil into the unloading direction. 4. Press the perforated paper into the cover. Engineering: Lid arrangement, described with vibrating hopper feeding and directional arrangement .