电话:13063274639邮箱:925921075@qq.com
欢迎访问Tongcheng Saiwei Automatic Packaging Equipment Factory网站  LanguageLink_RopDown
Home > news > Content

Brief knowledge of lid closing machine

2022-06-21   

First, the application fields of the capping machine:

Today, capping machines are widely used in shampoo bottles and cosmetic bottles. The butterfly caps are all produced by injection molding machines. When they are injected, they are all opened. However, the product needs to be flipped and closed after injection molding. Ideally Close them immediately after injection molding. Before the flip cover is closed, some butterfly caps need to be tested for defective products and oil spots. Now these processes are done manually, due to rising labor costs and difficulty in recruiting, which greatly affects the Cover machine.

In view of the above deficiencies, Tongcheng Saiwei Automatic Packaging Equipment Factory has produced a mechanical equipment that integrates injection molding, flip-top sealing, defective product detection, and oil dispensing, which can greatly improve production efficiency, reduce production costs, and completely solve the problem of labor difficulties. .It is the necessary equipment for mass production of plastic cover business.

2, the technical scheme of the capping machine:

The capping machine includes an injection molding machine, a manipulator, a special fixture, a fully automatic capping machine and a receiving box. The sealing machine is placed on the side of the injection molding machine, the manipulator is placed above the injection molding machine, the special fixture is installed on the manipulator, and the receiving box is placed on the whole. Below the automatic sealing machine. After the injection molding of the closing machine, the product is taken out by the manipulator and the special fixture, and placed on the sealing machine for defective product inspection, oiling, and turning over. After that, the qualified products are completely automatically put into the receiving box.

3. The machine features of the capping machine:

Manpower saving, fully automatic operation, wide versatility, no pollution, one machine is suitable for a variety of products, high comprehensive efficiency, safe operation, tailor-made.

4. The function and process of the cap closing machine:

The lid closing machine is a fully automatic oil spotting, turning and discharging device, including a feeding mechanism, an oil spotting mechanism, a turning mechanism, a lid closing mechanism and a receiving box of a discharging manipulator. The fed tissue is driven by a motor, and the product is Transfer it to the position of the oil-pointing tissue, and the oil-pointing pen performs oil-pointing operation on the center hole of the butterfly cover. After the oil separation is completed, the feeding mechanism transfers the product to the flipping mechanism, and the flipping mechanism performs the pre-flip operation, and the second flipping operation is performed immediately after the completion. . The product has been turned over, but some parts are not closed tightly. The feeding machine moves the product to the mechanical position of the capping machine, and the product is tightly covered by the cylinder to meet the process requirements. Then, all the products are transferred from the discharging manipulator to the receiving box, feeding The mechanism returns to the origin cycle and stops at the specified capacity.