Features and functions of the lid closing machine

2022-04-07

Application of capping machine

At present, plastic bottle butterfly caps are widely used in shampoo bottles and cosmetic bottles. Plastic butterfly caps are currently produced by injection molding machines. During injection molding, the butterfly caps are currently open, but after injection molding, the finished product must be turned over and closed. Ideally Close them immediately after injection molding. Before closing the flip, some butterfly caps need to be checked for defective products and oil filling procedures. Currently these procedures are done manually. Lifespan is greatly affected.

Features of capping machine

Manpower saving, fully automatic operation, wide versatility, one machine is suitable for a variety of products, high overall efficiency, safe operation, tailor-made, free installation and commissioning.

The function and process of the capping machine

A fully automatic capping machine (referred to as capping machine), which realizes fully automatic refueling, turning and discharging, including a feeding mechanism, a refueling mechanism, a turning mechanism, a capping mechanism and a discharging manipulator receiving box. The feeding mechanism drives the motor to The product is transferred to the oil-pointing mechanism, and the oil-pointing pen performs oil-pointing operation on the middle hole of the butterfly cover. After the oiling is completed, the feeding mechanism transfers the product to the flipping mechanism. First, the flipping mechanism performs the pre-flipping operation, and then immediately after the completion of the first flipping operation. 2 flip operations. The product has been turned, but some parts are not closed tightly. The feeder moves the product to the capping machine position, and the capping is closed by the air cylinder to meet the process requirements. Then, all the products are transferred by the discharge manipulator to The receiving box and the feeding mechanism return to the origin and circulate until the production capacity stops.

Technical scheme of automatic cap closing machine

A fully automatic production equipment for butterfly caps for plastic bottles, including an injection molding machine, a manipulator, a special fixture, a cap closing machine and a receiving box. The fully automatic cap closing machine is placed on the side of the injection molding machine, the manipulator is placed above the injection molding machine, and the special fixture is installed on the On the manipulator, the receiving box is placed under the automatic cap closing machine. After the plastic bottle butterfly cap is injection molded, the manipulator and special fixture take out the product and put it into the automatic cap closing machine for defective product inspection, oiling, turning over, and passing. The product is automatically put into the receiving box.

合盖机

Related News

Product Recommended

  • Longrich capping machine
  • Online capping machine
  • Cup label forming mac...
  • High Quality Strandin...
  • Stranding machine
  • bottle cap filling ma...