The glue caps produced by the glue cap machine are generally suitable for the fields of sealing packaging and anti-counterfeiting

The glue caps produced by the glue cap machine are generally suitable for the fields of sealed packaging and anti-counterfeiting.

The glue cap machine produces bottle sealant caps, which involves the field of packaging anti-counterfeiting. It has a laser rod that is longitudinally attached to the inside of the main material of the rubber cap, and a V-shaped hob indentation on the attached part, which causes physical damage to the used laser rod. , It is convenient to open manually. There is a dashed through hole that runs through the main material of the rubber cap longitudinally in other positions where the laser bar is not attached, which can be opened after auxiliary use. The pattern and content information in the laser bar are designed as special or general versions. The laser bar and The main material of the rubber cap is pasted with colorless and transparent composite adhesive. The rubber cap attached to the laser rod can be clearly seen from the outside of the laser rod, and the pattern and content information in the laser rod are easy to observe and distinguish.

The main material of the rubber cap is heat-shrinkable polyvinyl chloride film material. When in use, put the rubber cap between the bottle C and the neck of the bottle to be packaged. Through the heat-shrinking device, the product shrinks and wraps the bottle mouth and part of the bottle neck below the bottle mouth. So as to achieve the purpose of sealed packaging, anti-counterfeiting and convenient opening.