Functions and features of the upper and lower cover assembly machines

If the "Pause" button is pressed during the operation of the upper and lower cover assembly machine, the system will not run intermittently immediately. Each station is gradually interrupted until there is no workpiece on the turntable. During this process, the running indicator will light up, indicating that the system is running Stop the upper and lower lid assembly machine for liquor until the indicator light goes out when the system is officially interrupted. During the working process of the upper and lower lid assembly machine, if you press the "Emergency Interrupt" button, the system will immediately interrupt the operation, and then all the manipulators will interrupt the operation direction. When the "interrupt" button is pulled up, the system initially resets the cap assembler, and all the manipulators return to the initial position of the fully activated cap assembler, waiting for restart.

The function of the upper and lower cap assembly machine is to end the cap feeding, punch the paper, and insert it into the upper and lower cap assembly machine. In order to end the function of 120 sheets\/\/min, the mechanical layout of the equipment adopts a vibrating hopper to arrange the caps, double-channel cap feeding, double Knife cutting, 2 stepping motors control cover feeding, one stepping motor controls paper feeding. Solenoid valve controls the cylinder to move the piston to plug the paper, etc. The overall flow of the mechanical system is shown in Figure 1. The mechanical system of the upper and lower cover assembly machine It consists of the arrangement of the bottle caps, the conveying arrangement of the upper and lower cap assembly machines, the conveying arrangement of the gasket material, the blanking arrangement, the paper blocking arrangement, etc.

The characteristics of the upper and lower cap assembly machine and the introduction of the equipment assembly process: Put the upper and lower bottle caps to be assembled into the left and right active feeders respectively: through the vibration and rotation in the feeder, they enter the conveying chute in the same direction, and then pass through the feeder. The slideway enters the central pressing host station. By pressing the rotation of the host, the upper and lower covers to be assembled can be accurately positioned and oriented by the radial pushing action of the negative plate, and then continue to rotate by pressing the plate, and then in the cam track Press the upper and lower columns together under the action.

The function of the upper and lower cap assembly machine is to end the feeding of the caps, cut the paper, and insert the cap assembly. In order to complete the function of 120 sheets\/minute, the mechanical layout of the equipment consists of a vibrating hopper, double-channel cap feeding, and double cutting and blanking. , 2 stepper motor controlled cover feeding, one stepper motor controlled paper feeding, solenoid valve controlled paper jam, etc.

The mechanical system of the upper and lower cap assembly machine consists of the arrangement of the bottle caps, the conveying arrangement of the upper and lower cap assembly machine, the conveying arrangement of the gasket material, the blanking arrangement, the paper blocking arrangement, etc. Technical principle: 1. Clean the cap and make the cap face Up. 2. Transfer the cover to the unloading position. 3. Send the aluminum foil to the unloading position. 4. Press the perforated paper into the cover. Process: cover plate arrangement, vibrating hopper loading, orientation arrangement and instructions.