电话:13063274639邮箱:925921075@qq.com
欢迎访问Tongcheng Saiwei Automatic Packaging Equipment Factory网站  LanguageLink_RopDown

The working process of the condiment cover assembly machine

2020-09-18   Tongcheng Saiwei Automatic Packaging Equipment Factory

The working process of the condiment cover assembly machine


Today, I will tell you about the working process of the condiment cover assembly machine.


If the "Pause" button is pressed during the working process of the condiment cap assembly machine, the system will not interrupt the operation immediately. The operation of each station is gradually interrupted until there is no workpiece on the rotating work table. During this process, the operation indicator light will flash to indicate The system is in the process of shutting down the liquor bottle cap assembly machine, until the indicator light subsides when the system is officially interrupted. If the emergency interrupt button is pressed during the working process of the bottle cap assembly machine, the system will immediately interrupt the operation, and all the manipulators will be interrupted in the working position at that time. When the "emergency interrupt" button is pulled up, the system initially resets the cap assembly machine, and all the manipulators return to the initial position of the fully automatic cap assembly machine, waiting for restart.


The function of the single condiment cap assembly machine is to finish feeding the cap, punch out the paper, and stuff it into the condiment cap assembly machine. In order to achieve the function of 120 pieces\/min, the mechanical layout of the equipment adopts the vibrating hopper to arrange the cap, double channel Cap feeding, double-knife punching, 2 stepping motors control cap feeding, one stepping motor controls paper feeding. Solenoid valve controls cylinder to move piston plug paper, etc. The overall flow of the mechanical system is shown in Figure 1. Cap assembly The mechanical system of the machine is composed of cap arrangement, bottle cap assembly machine transmission arrangement, gasket material transmission arrangement, blanking arrangement and paper jam arrangement.


Features and introduction of the automatic bottle cap assembly machine The process of equipment assembly: Put the upper and lower caps that need to be assembled into the left and right two active feeders: make them enter the transport chute in the same direction through vibration and rotation, and then pass through the feeder. The slideway enters the station of the central pressing machine, and through the rotation of the pressing machine, the upper and lower covers to be assembled are pushed through the radial direction of the negative disk, so that the upper and lower covers can be accurately positioned and oriented.


Then the upper and lower covers are pressed together under the action of the cam track by the upper and lower vertical rods, and then the pressed upper and lower covers are separated from the pressing plate by the shifting fork, and the whole assembly is completed. process.


The function of the single condiment cap assembly machine is to complete the cap feeding, punch out the paper, and insert it into the cap assembly. In order to achieve the function of 120 caps\/min, the mechanical layout of the equipment adopts the vibrating hopper for capping, the double-channel feeding Cover, double-knife blanking, 2 stepper motors control cover feeding, one stepper motor controls paper feeding, solenoid valve controls cylinder stock moving piston paper plugging, etc.


The mechanical system of the cap assembly machine is composed of the cap arrangement, the conveying arrangement of the cap assembly machine, the conveying arrangement of the gasket material, the punching arrangement and the jamming arrangement. Transfer the cover and transport it to the punching position. 3. Send the aluminum foil sheet into the punching position. 4. Press the punched sheet into the cover. Technical engineering: cover arrangement, feeding by vibrating hopper, directional arrangement and drawing .